Contact Us
Close
  • EN
  • FR
  • GER
  • IT
  • NL
  • POR
  • SP

Want To Know More?



Dehumidifiers

DryGair’s selection of dehumidifiers is designed, engineered and tested for optimal performance and energy efficiency under typical growing facilities’ climate conditions. The units’ reliability and exceptional built quality are proven by hundreds of satisfied growers using our dehumidifiers, in various commercial greenhouses, growing facilities, crops, and climates around the world.

Large Standard Unit

DG-13

DG-13

DryGair’s largest unit, in both dehumidification and air flow. It is designed for warm/tropical climates, with heavy nighttime humidity. The DG-13 creates intense air flow distribution and condenses up to 13 gallons (48 liters) per hour.

  • Available in split and/or additional heating & cooling configurations.
  • Extremely wide optimal temperature range, spanning 10° C to 40° C (50° F - 104° F).
  • Particularly efficient for humidity control in facilities dealing with large heat loads.
Get a Quote
DG-13
DimensionsDepth
933 mm		Depth
3’ - 3/4”
Width
2,570 mm		Width
8’ - 5 3/16”
Height*2,270 mm
(2,770 mm with air
distribution module)		7’- 5 3/8”
(9’ - 7 1/16” with air
distribution module)
Water condensation
@18 °C ,80% RH		48 L/h13 G/h
Air flow~22,500 m/h3~ 13,250 CFM
Electricity consumption12 kw12 kw
Area coverageUp to 4,000 m2 Up to 40,000 ft2
Weight~920 kg~2,028 lb
Type of Refrigerant R134AR134A
Electricity requirements50 Hz
3 phase, 400V
I(Oper. max)= 44 Amp

* Exact height can be specifically adjusted.
• The unit can be positioned on the ground - along the aisles, as part of the rows, on the side of the greenhouse; or it can be hung.
• Electricity consumption @ conditions 18°C (64°F)/80%RH.

Technical Details Comparison

Air Circulation:

Why does air circulation matter so much?

The DG-13 uses double-sided air input and has a patent protected design that creates uniform and constant climate conditions throughout the entire greenhouse. The powerful air circulation (13,250 CFM or 22,500 m3/h) is a clear advantage for commercial greenhouses with high plant density.

When the greenhouse is isolated, the unit collects the cold and humid air from between the plants, and “throws” it dry and warm in each direction to create unique 360° flow of dry air around the plants’ foliage.

Powerful Dehumidification:

Why do you need professional humidity control for greenhouse crops? 

The unit is designed to condense 48* L/h (13 G/h) of water, ~576 L/night (12 hours) (~152 G/night), the highest extraction rate on the market. It utilizes only 12 kW of electricity.

*At designed conditions of 18°C (64°F), 80% RH

Covered Area:

When calculating the area that can be covered by a single DG-13 unit it is important to take in consideration plant density, average daily temperature and radiation intensity. We use the “Leaf area index” (LAI) to characterize plant canopies and recommended number of units for the best results:

DryGair DG-13 covered area LAI
3,000 to 4,000 m2 1-2 (For example micro leaves)
Up to 2,000 m2 2-3 (For example Basil)
Up to 1,500 m2 3-4 (For example Tomatoes)
Up to 1,000 m2 4+ (For example Medical Cannabis)
  • Contact us for information about your LAI

Related products and add-ons

Minimize Energy Consumption & get Fast ROI with the “DryGair Solution”:

The DryGair Solution concept is based on closing the greenhouse, fully spreading the thermal screen (if applicable), and operating the DryGair unit. The unit heat-exchange technology treats the air, circulating it throughout the crops to create optimal uniform climate conditions for the plants. The unit utilizes the fans to suck the humid air from between the plants from the bottom of the greenhouse.

The DG-13 saves on average 8.5 kW of heating on every electrical 1 kW invested in dehumidification in comparison to controlling humidity using the traditional methods of heating & ventilating.

The DryGair Solution gives the grower the ability to control humidity levels and achieve homogeneous climatic conditions for long period of time while preventing 100% of heat loss from ventilation, and without the fluctuations typical to the traditional dehumidification solution of heating & ventilating.

 

 

Standard Unit

DG-12

DG-12

DryGair’s flagship unit. Condenses up to 12 gallons (45 liters, 48 liters for the DG-12 EU) of water per hour, using less than 1 kWh per gallon (~4 liters). It is the perfect balance of efficient, large-scale dehumidification with plug & play ease of use.

  • Comfortable size, ideal for integration into existing or new commercial greenhouses.
  • Plug & play. Easy placement in the center or side of the greenhouse, along the aisles, on the ground or hung.
Get a Quote

Variations

Split
DG-12
DG-12DG-12 EU
For EU countries only
DimensionsDepth
930 mm		Depth
3’ -0 3/4”		Depth
933 mm
Width
2,320 mm		Width
7’ -7 1/4”		Width
2,570
Height*2,410 mm
(2,780 mm with air
distribution module)		7’- 10 3/4”
(9’ - 1 11/12” with air
distribution module)		2,270 mm
(2,770 mm with air distribution module)
Water condensation
@18 °C ,80% RH		45 L/h12 G/h48 L/h
Air flow~22,000 m/h3~ 13,000 CFM~22,500 m/h3
Electricity consumption10 kw12 kw
Area coverageUp to 4,000 m2 Up to 40,000 ft2Up to 4,000 m2
Weight~775 kg~1710 lb~925 kg
Type of Refrigerant R507R507R513a
Electricity requirements60 Hz3 phase, 460V, 60 Hz
I(Oper. max)= 21 Amp		OR3 phase, 208V, 60 Hz
I(Oper. max)= 46 Amp
50 Hz3 phase, 400V, 50 Hz
I(Oper. max)= 31 Amp		3 phase, 400V, 50 Hz
I(Oper. max) = 44 Amp

* Exact height can be specifically adjusted.
• The unit can be positioned on the ground - along the aisles, as part of the rows, on the side of the greenhouse; or it can be hung.
• Electricity consumption @ conditions 18°C/80%RH.

Technical Details Comparison

Air Circulation:

Why does air circulation matter so much?

The DG-12 uses double-sided air input and has a patent protected design that creates uniform and constant climate conditions throughout the entire greenhouse. The powerful air circulation (13,000 CFM or 22,000 m3/h, 22,500 m3/h for the DG-12 EU ) is a clear advantage for commercial greenhouses with high plant density.

When the greenhouse is isolated, the unit collects the cold and humid air from between the plants, and “throws” it dry and warm in each direction to create unique 360° flow of dry air around the plants’ foliage.

Powerful Dehumidification:

Why do you need professional humidity control for greenhouse crops? 

The unit is designed to condense 45-48* L/h (12 G/h) of water, ~540 – 576 L/night (12 hours) (~143-153 G/night), the highest extraction rate on the market. It utilizes only 10kW of electricity (12kW for the DG-12 EU).

*At designed conditions of 18°C, 80% RH

DG12 EU water extraction rate graph

Covered Area:

When calculating the area that can be covered by a single DG-12 unit it is important to take in consideration plant density, average daily temperature and radiation intensity. We use the “Leaf area index” (LAI) to characterize plant canopies and recommended number of units for the best results:

DryGair DG-12 covered area LAI
3,000 to 4,000 m2 1-2 (For example micro leaves)
Up to 2,000 m2 2-3 (For example Basil)
Up to 1,500 m2 3-4 (For example Tomatoes)
Up to 1,000 m2 4+ (For example Medical Cannabis)
  • Contact us for information about your LAI

This unit is available with the SmartDG upgrade – Realtime Humidity Control & Data.

Related products and add-ons

Minimize Energy Consumption & get Fast ROI with the “DryGair Solution”:

The DryGair Solution growing concept is based on closing the greenhouse, fully spreading the thermal screen (if applicable), and operating the DryGair unit. The unit heat-exchange technology treats the air, circulating it throughout the crops to create optimal uniform climate conditions for the plants. The unit utilizes the fans to suck the humid air from between the plants from the bottom of the greenhouse.

The DG-12 saves on average 8.5 kW of heating on every electrical 1 kW invested in dehumidification in comparison to controlling humidity using the traditional methods of heating & ventilating.

The DryGair Solution gives the grower the ability to control humidity levels and achieve homogeneous climatic conditions for long period of time while preventing 100% of heat loss from ventilation, and without the fluctuations typical to the traditional dehumidification solution of heating & ventilating.

DryGair dehumidification ROI

 

 

Standard Unit

DG-12 Split

DG-12 Split

We understand the growers’ need to maximize the utilization of greenhouse space using tables and machinery. Our split unit can be positioned according to the greenhouse’s specific limitations.

  • Easy integration in complex growing facilities with one or more levels of crop, moving\non moving tables, no aisles, low roofs etc'
  • Spraying booms can move under the units.
  • Identical performance to the standard unit.
  • The bottom compartment houses the isolated compressor department. The top compartment includes fans, evaporation and condensation coils, and heating & cooling coils.
Get a Quote

Variations

Standard
DG-12 Split
DG-12DG-12 EU
For EU countries only
Upper partLower partUpper partLower part
DimensionsDepth
1,130 mm (3'- 8 1/2")		Depth
820 mm (2'-8 1/4")		Depth
933 mm		Depth
933 mm
Width
2,320 mm ( 7' - 7 1/4")		Width
1,900 mm (6'- 2 3/4")		Width
2,570 mm		Width
1,900 mm
Hight*1,740 mm (5'-8 1/2").
2,100 (6'-10 3/4") mm with
air distribution module		940 mm (3'-1")1,600 mm.
2,100 with air distribution
module.		940 mm
Weight~550 kg (1,210 Ib)~330 kg (725 lb)~550 kg~390

* Exact heigh can be specifically adjusted
** Depends on the crop

Technical Details Comparison

The split unit includes two sections:

• Lower section that includes the compressor and the electrical switchboard.
• Upper section in which the air treatment is performed.

Both the upper and lower sections have a pair of copper tubes that should be connected between them, connecting the compressor to the air handling section of the unit. The split unit sections can be placed one next to each other, or one above the other (air treatment section above the compressor and electrical switchboard). In both cases, the upper unit must be at a height of at least 50–60 cm from the floor.

This unit is available with the SmartDG upgrade – Realtime Humidity Control & Data.

Air Circulation:

Why does air circulation matter so much?

The DG-12 uses double-sided air input and has a patent protected design that creates uniform and constant climate conditions throughout the entire greenhouse. The powerful air circulation (13,000 CFM or 22,000 m3/h, 22,500 m3/h for the DG-12 EU ) is a clear advantage for commercial greenhouses with high plant density.

When the greenhouse is isolated, the unit collects the cold and humid air from between the plants, and “throws” it dry and warm in each direction to create unique 360° flow of dry air around the plants’ foliage.

Powerful Dehumidification:

Why do you need professional humidity control for greenhouse crops? 

The unit is designed to condense 45-48* L/h (12 G/h) of water, ~540 – 576 L/night (~143-153 G/night – 12 hours), the highest extraction rate on the market. It utilizes only 10kW of electricity (12kW for the DG-12 EU).

*At designed conditions of 18°C, 80% RH

Covered Area:

When calculating the area that can be covered by a single DG-12 unit it is important to take in consideration plant density, average daily temperature and radiation intensity. We use the “Leaf area index” (LAI) to characterize plant canopies and recommended number of units for the best results:

DryGair DG-12 covered area LAI
3,000 to 4,000 m2 1-2 (For example micro leaves)
Up to 2,000 m2 2-3 (For example Basil)
Up to 1,500 m2 3-4 (For example Tomatoes)
Up to 1,000 m2 4+ (For example Medical Cannabis)
  • Contact us for information about your LAI

Related products and add-ons

Minimize Energy Consumption & get Fast ROI with the “DryGair Solution”:

The DryGair Solution growing concept is based on closing the greenhouse, fully spreading the thermal screen (if applicable), and operating the DryGair unit. The unit heat-exchange technology treats the air, circulating it throughout the crops to create optimal uniform climate conditions for the plants. The unit utilizes the fans to suck the humid air from between the plants from the bottom of the greenhouse.

The DryGair Solution gives the grower the ability to control humidity levels and achieve homogeneous climatic conditions for long period of time while preventing 100% of heat loss from ventilation, and without the fluctuations typical to the traditional dehumidification solution of heating & ventilating.

DryGair dehumidification ROI

 

 

Standard Unit

DG-12 Heating & Cooling

DG-12 Heating & Cooling

The DG-12, combined with heating & cooling, is an innovative solution for greenhouse heating or cooling, controlling both humidity and temperature in an energy efficient manner. The unit can gradually heat or cool the dried, treated air, flowing out of the dehumidifier. The dehumidification, combined with heating & cooling, offers a solution to uniformly control climate, utilizing significantly simplified infrastructure, compared to alternatives

  • "All-in-one" - Powerful humidity control, heating & cooling and air circulation.
  • Heating mode: Steady temperature increase during cold nights for optimal climate conditions.
  • Cooling mode: Reduce temperatures without risking high humidity and disease, as opposed to other cooling methods, such as wet pod.
  • Can replace a heating/cooling system.
Get a Quote

Variations

Split
DG-12 Heating & Cooling
DG12DG12 EU
For EU countries only
DimensionsDepth
930 mm		Depth
3’ -0 3/4”		Depth
933 mm
Width
2,320 mm + 350 mm of the hot/cold water coil pipes		Width
7’ -7 1/4” + 1'-1 3/4" of the hot/cold water coil pipes		Width
2,570 + 300 mm of the hot/cold water coil pipes
Height*2,520 mm
(2,880 mm with air
distribution module)		8'-3 1/4"
(9'-5 1\2" with air
distribution module)		2,420 mm (2,920 mm with air distribution module)
Water condensation
@18 °C ,80% RH		45 L/h12 G/h48 L/h
Air flow~22,000 m/h3~ 13,000 CFM~22,500 m/h3
Electricity consumption10 kw12 kw
Area coverageUp to 4,000 m2 Up to 40,000 ft2Up to 4,000 m2
Weight~825 kg~1,815 lb~960 kg
Type of Refrigerant R507R507R513a
Electricity requirements60 Hz3 phase, 460V, 60 Hz
I(Oper. max)= 21 Amp		OR3 phase, 208V, 60 Hz
I(Oper. max)= 46 Amp
50 Hz3 phase, 400V, 50 Hz
I(Oper. max)= 31 Amp		3 phase, 400V, 50 Hz
I(oper. max) = 44 Amp

* Exact height can be specifically adjusted.
• The unit can be positioned on the ground - along the aisles, as part of the rows, on the side of the greenhouse; or it can be hung.
• Electricity consumption @ conditions 18°C/80%RH.

Technical Details Comparison

Heating & Cooling – Temperature control

The heating & cooling unit can gradually increase or decrease temperatures alongside advanced humidity control.

learn about DryGair’s greenhouse dehumidification combined with heating & cooling

This unit is available with the SmartDG upgrade – Realtime Humidity Control & Data.

Air Circulation:

Why does air circulation matter so much?

The DG-12 heating & cooling uses double-sided air input and has a patent protected design that creates uniform and constant climate conditions throughout the entire greenhouse. The powerful air circulation (13,000 CFM or 22,000 m3/h, 22,500 m3/h for the DG-12 EU ) is a clear advantage for commercial greenhouses with high plant density.

When the greenhouse is isolated, the unit collects the cold and humid air from between the plants, and “throws” it dry and warm in each direction to create unique 360° flow of dry air around the plants’ foliage.

Powerful Dehumidification:

Why do you need professional humidity control for greenhouse crops? 

The unit is designed to condense 45-48* L/h (12 G/h) of water, ~540 – 576 L/night (12 hours) (~143-153 G/night), the highest extraction rate on the market. It utilizes only 10kW of electricity (12kW for the DG-12 EU).

*At designed conditions of 18°C, 80% RH

Covered Area:

When calculating the area that can be covered by a single DG-12 heating & cooling unit it is important to take in consideration plant density, average daily temperature and radiation intensity. We use the “Leaf area index” (LAI) to characterize plant canopies and recommended number of units for the best results:

DryGair DG-12 covered area LAI
3,000 to 4,000 m2 1-2 (For example micro leaves)
Up to 2,000 m2 2-3 (For example Basil)
Up to 1,500 m2 3-4 (For example Tomatoes)
Up to 1,000 m2 4+ (For example Medical Cannabis)
  • Contact us for information about your LAI

Related products and add-ons

Minimize Energy Consumption & get Fast ROI with the “DryGair Solution”:

The DryGair Solution growing concept is based on closing the greenhouse, fully spreading the thermal screen (if applicable), and operating the DryGair unit. The unit heat-exchange technology treats the air, circulating it throughout the crops to create optimal uniform climate conditions for the plants. The unit utilizes the fans to suck the humid air from between the plants from the bottom of the greenhouse.

The DG-12 saves on average 8.5 kW of heating on every electrical 1 kW invested in dehumidification in comparison to controlling humidity using the traditional methods of heating & ventilating.

The DryGair Solution gives the grower the ability to control humidity levels and achieve homogeneous climatic conditions for long period of time while preventing 100% of heat loss from ventilation, and without the fluctuations typical to the traditional dehumidification solution of heating & ventilating.

DryGair dehumidification ROI

 

 

 

Split Standard Unit

DG-12 Heating & Cooling Split

DG-12 Heating & Cooling Split

We understand the growers’ need to maximize the utilization of greenhouse space using tables and machinery. Our split unit can be positioned according to the greenhouse’s specific limitations. The split heating & cooling unit offers customization of the positioning of the unit as well as complete control over all climate conditions.

  • Identical performance to the standard heating & cooling unit
  • Easy integration in complex growing facilities with one or more levels of crop, moving\non moving tables, no aisles, low roofs etc'
  • The bottom compartment houses the isolated compressor department. The top compartment includes fans, evaporation and condensation coils, and heating & cooling coils.
  • Spraying booms can move under the units.
Get a Quote

Variations

Standard
DG-12 Heating & Cooling Split
DG-12DG-12 EU
For EU countries only
Upper partLower partUpper partLower part
DimensionsDepth
1,130 mm (3'- 8 1/2")		Depth
820 mm (2'-8 1/4")		Depth
933 mm		Depth
933 mm
Width
2,320 mm ( 7' - 7 1/4") + 350 mm (1'-1 3/4") of the hot/cold water coil pipes		Width
1,900 mm (6'- 2 3/4")		Width
2,570 mm + 300 mm of the hot/cold water coil pipes		Width
2,000 mm
Hight*1,850 mm (6'-0 3/4").
2,210 (7'-3") mm with
air distribution module		940 mm (3'-1")1,830 mm.
2,260 with air distribution
module.		940 mm
Weight~600 kg (1,320 Ib)~330 kg (725 lb)~610 kg~410

* Exact height can be specifically adjusted.
• Electricity consumption @ conditions 18°C/80%RH.

Technical Details Comparison

The split unit includes two sections:

• Lower section that includes the compressor and the electrical switchboard.
• Upper section in which the air treatment is performed.

Both the upper and lower sections have a pair of copper tubes that should be connected between them, connecting the compressor to the air handling section of the unit. The split unit sections can be placed one next to each other, or one above the other (air treatment section above the compressor and electrical switchboard). In both cases, the upper unit must be at a height of at least 50–60 cm from the floor.

This unit is available with the SmartDG upgrade – Realtime Humidity Control & Data.

For information about the DG-12 heating & cooling split unit installation options please contact us with the form below

Small Unit

DG-6

DG-6

The DG-6 shares the efficiency of the larger DG-12. It features the same unique, slim design, and air distribution module, but significantly shorter in height, allowing for easier integration to various growing facilities.

  • Electricity consumption of only 6 kW.
  • Plug & play. Easy placement in the center or side of the greenhouse, along the aisles, on the ground or hung.
Get a Quote

Variations

Split
DG-6
DG-6DG-6 EU
For EU countries only
DimensionsDepth
930 mm		Depth
3’ -0 3/4”		Depth
933 mm
Width
2,320 mm		Width
7’ -7 1/4”		Width
2,570
Height*2,075 mm
(2,435 mm with air
distribution module)		6'-9 3/4
(7’ - 11 3/4” with air
distribution module)		1,920 mm
(2,435 mm with air distribution module)
Water condensation
@18 °C ,80% RH		24 L/h6 G/h25 L/h
Air flow~12,000 m/h3~ 7,000 CFM~13,500 m/h3
Electricity consumption6 kw6.5 kw
Area coverageUp to 2,000 m2 Up to 21,000 ft2Up to 2,000 m2
Weight~550 kg~1210 lb~850 kg
Type of Refrigerant R507R507R513a
Electricity requirements60 Hz3 phase, 208V, 60 Hz
I(Oper. max)= 30 Amp		OR3 phase, 460V, 60 Hz
I(Oper. max)= 16 Amp
50 Hz3 phase, 400V, 50 Hz
I(Oper. max)= 18 Amp		3 phase, 400V, 50 Hz
I(Oper. max) = 35 Amp

* Exact height can be specifically adjusted.
• The unit can be positioned on the ground - along the aisles, as part of the rows,
on the side of the greenhouse; or it can be hung.
• Electricity consumption @ conditions 18°C/80%RH.

Technical Details Comparison

Air Circulation:

Why does air circulation matter so much?

The DG-6 uses double-sided air input and has a patent protected design that creates uniform and constant climate conditions throughout the entire greenhouse. The powerful air circulation (7,000 CFM or 12,000 m3/h) is a clear advantage for commercial greenhouses with high plant density.

When the greenhouse is isolated, the unit collects the cold and humid air from between the plants, and “throws” it dry and warm in each direction to create unique 360° flow of dry air around the plants’ foliage.

This unit is available with the SmartDG upgrade – Realtime Humidity Control & Data.

Powerful Dehumidification:

Why do you need professional humidity control for greenhouse crops? 

The unit is designed to condense 24* L/h (6 G/h) of water, ~288 L/night (12 hours) (~76 G/night), the highest extraction rate on the market. It utilizes only 12 kW of electricity.

*At designed conditions of 18°C, 80% RH

Covered Area:

When calculating the area that can be covered by a single DG-6 unit it is important to take in consideration plant density, average daily temperature and radiation intensity. We use the “Leaf area index” (LAI) to characterize plant canopies and recommended number of units for the best results:

DryGair DG-6 covered area LAI
1,500 to 2,000 m2 1-2 (For example micro leaves)
Up to 1,000 m2 2-3 (For example Basil)
Up to 750-1,000 m2 3-4 (For example Tomatoes)
Up to 500 m2 4+ (For example Medical Cannabis)
  • Contact us for information about your LAI

Related products and add-ons

Minimize Energy Consumption & get Fast ROI with the “DryGair Solution”:

The DryGair Solution growing concept is based on closing the greenhouse, fully spreading the thermal screen (if applicable), and operating the DryGair unit. The unit heat-exchange technology treats the air, circulating it throughout the crops to create optimal uniform climate conditions for the plants. The unit utilizes the fans to suck the humid air from between the plants from the bottom of the greenhouse.

The DryGair Solution gives the grower the ability to control humidity levels and achieve homogeneous climatic conditions for long period of time while preventing 100% of heat loss from ventilation, and without the fluctuations typical to the traditional dehumidification solution of heating & ventilating.

DryGair dehumidification ROI

 

 

 

Small Split Unit

DG-6 Split

DG-6 Split

We understand the growers’ need to maximize the utilization of greenhouse space using tables and machinery. The DG-6 split upper and lower compartments can be positioned according to the greenhouse’s specific limitations.

  • Identical performance to the DG-6 standard unit.
  • Easy integration in complex growing facilities with one or more levels of crop, moving\non moving tables, no aisles, low roofs etc'
  • The bottom compartment houses the isolated compressor department. The top compartment includes fans, evaporation and condensation coils.
  • Spraying booms can move under the units.
Get a Quote

Variations

Standard
DG-6 Split
DG-6DG-6 EU
For EU countries only
Upper partLower partUpper partLower part
DimensionsDepth
1,120 mm (3'- 8")		Depth
820 mm (2'-8 1/4")		Depth
933 mm		Depth
820 mm
Width
2,300 mm ( 7' - 6 1/2")		Width
1,655 mm (5'- 5 1/4")		Width
2,570 mm		Width
1,900 mm
Hight*1,160 mm (3'-9 3/4").
+~500 mm (~1'-7 3/4") with
air distribution module		950 mm (3'-1 1/2")1,215 mm.
1,625 with air distribution
module.		940 mm
Weight~330 kg (725 Ib)~325 kg (715 lb)~540 kg~360 kg

* Exact height can be specifically adjusted.
• Electricity consumption @ conditions 64°F (18°C)/80%RH.

Technical Details Comparison

The split unit includes two sections:

• Lower section that includes the compressor and the electrical switchboard.
• Upper section in which the air treatment is performed.

Both the upper and lower sections have a pair of copper tubes that should be connected between them, connecting the compressor to the air handling section of the unit. The split unit sections can be placed one next to each other, or one above the other (air treatment section above the compressor and electrical switchboard). In both cases, the upper unit must be at a height of at least 50–60 cm from the floor.

This unit is available with the SmartDG upgrade – Realtime Humidity Control & Data.

For information about the DG-6 split unit installation options please contact us with the form below

Small unit

DG-6 Heating & Cooling

DG-6 Heating & Cooling

The DG-6, combined with heating & cooling, is an innovative solution for greenhouse heating or cooling, controlling both humidity and temperature in an energy efficient manner. The unit can gradually heat or cool the dried, treated air, flowing out of the dehumidifier. The dehumidification, combined with heating & cooling, offers a solution to uniformly control climate, utilizing significantly simplified infrastructure, compared to alternatives.

  • "All-in-one" - Powerful humidity control, heating & cooling and air circulation.
  • Can replace a heating/cooling system.
  • Heating mode: Steady temperature increase during cold nights for optimal climate conditions.
  • Cooling mode: Reduce temperatures without risking high humidity and disease, as opposed to other cooling methods, such as wet pod.
Get a Quote

Variations

Split
DG-6 Heating & Cooling
DG6DG6 EU
For EU countries only
DimensionsDepth
930 mm		Depth
3’ -0 3/4”		Depth
933 mm
Width
2,320 mm + 350 mm of the hot/cold water coil pipes		Width
7’ -7 1/4” + 1'-1 3/4" of the hot/cold water coil pipes		Width
2,570 + 300 mm of the hot/cold water coil pipes
Height*2,185 mm
(2,545 mm with air
distribution module)		7'-2"
(8'-4 1\4" with air
distribution module)		2,070 mm (2,570 mm with air distribution module)
Water condensation
@18 °C ,80% RH		24 L/h6 G/h25 L/h
Air flow~12,000 m/h3~ 7,000 CFM~13,000 m/h3
Electricity consumption6 kw6.5 kw
Area coverageUp to 2,000 m2 Up to 21,000 ft2Up to 2,000 m2
Weight~600 kg~1,320 lb~890 kg
Type of RefrigerantR507R507R513a
Electricity requirements60 Hz3 phase, 208V, 60 Hz
I(Oper. max)= 30 Amp		3 phase, 460V, 60 Hz
I(Oper. max)= 16 Amp
50 Hz3 phase, 400V, 50 Hz
I(Oper. max)= 18 Amp		3 phase, 400V, 50 Hz
I(oper. max) = 35 Amp

* Exact height can be specifically adjusted.
• The unit can be positioned on the ground - along the aisles, as part of the rows, on the side of the greenhouse; or it can be hung.
• Electricity consumption @ conditions 18°C/80%RH.

Technical Details Comparison

Heating & Cooling – Temperature control

The heating & cooling unit can gradually increase or decrease temperatures alongside advanced humidity control.

learn about DryGair’s greenhouse dehumidification combined with heating & cooling

This unit is available with the SmartDG upgrade – Realtime Humidity Control & Data.

Air Circulation:

Why does air circulation matter so much?

The DG-6 uses double-sided air input and has a patent protected design that creates uniform and constant climate conditions throughout the entire greenhouse. The powerful air circulation (7,000 CFM or 12,000 m3/h) is a clear advantage for commercial greenhouses with high plant density.

When the greenhouse is isolated, the unit collects the cold and humid air from between the plants, and “throws” it dry and warm in each direction to create unique 360° flow of dry air around the plants’ foliage.

Powerful Dehumidification:

Why do you need professional humidity control for greenhouse crops? 

The unit is designed to condense 24* L/h (6 G/h) of water, ~288 L/night (12 hours) (~76 G/night), the highest extraction rate on the market. It utilizes only 12 kW of electricity.

*At designed conditions of 18°C, 80% RH

Covered Area:

When calculating the area that can be covered by a single DG-6 heating & cooling unit it is important to take in consideration plant density, average daily temperature and radiation intensity. We use the “Leaf area index” (LAI) to characterize plant canopies and recommended number of units for the best results:

DryGair DG-6 covered area LAI
1,500 to 2,000 m2 1-2 (For example micro leaves)
Up to 1,000 m2 2-3 (For example Basil)
Up to 750-1,000 m2 3-4 (For example Tomatoes)
Up to 500 m2 4+ (For example Medical Cannabis)
  • Contact us for information about your LAI

Related products and add-ons

Minimize Energy Consumption & get Fast ROI with the “DryGair Solution”:

The DryGair Solution growing concept is based on closing the greenhouse, fully spreading the thermal screen (if applicable), and operating the DryGair unit. The unit heat-exchange technology treats the air, circulating it throughout the crops to create optimal uniform climate conditions for the plants. The unit utilizes the fans to suck the humid air from between the plants from the bottom of the greenhouse.

The DryGair Solution gives the grower the ability to control humidity levels and achieve homogeneous climatic conditions for long period of time while preventing 100% of heat loss from ventilation, and without the fluctuations typical to the traditional dehumidification solution of heating & ventilating.

DryGair dehumidification ROI

 

 

 

Small Split Unit

DG-6 Heating & Cooling Split

DG-6 Heating & Cooling Split

We understand the growers’ need to maximize the utilization of greenhouse space using tables and machinery. The DG-6 heating & cooling split unit can be positioned according to the greenhouse’s specific limitations.

  • Easy integration in complex growing facilities with one or more levels of crop, moving\non moving tables, no aisles, low roofs etc'
  • Identical performance to the standard DG-6 heating & cooling unit
  • Spraying booms can move under the units.
  • The bottom compartment houses the isolated compressor department. The top compartment includes fans, evaporation and condensation coils, and heating & cooling coils.
Get a Quote

Variations

Standard
DG-6 Heating & Cooling Split
DG-6DG-6 EU
For EU countries only
Upper partLower partUpper partLower part
DimensionsDepth
1,120 mm (3'- 8")		Depth
820 mm (2'-8 1/4")		Depth
933 mm		Depth
820 mm
Width
2,300 mm ( 7' - 6 1/2") + 350 mm (1'-1 3/4") of the hot/cold water coil pipes		Width
1,655 mm (5'- 5 1/4")		Width
2,570 mm + 300 mm of the hot/cold water coil pipes		Width
1,900 mm
Hight*1,300 mm (4'-3 1/4").
+~500 mm (1'-7 3/4") with
air distribution module		950 mm (3'-1 1/2")1,290 mm.
1,800 mm with air distribution
module.		950 mm
Weight~550 kg (1,200 Ib)~325 kg (710 lb)~565 kg~375 kg

* Exact height can be specifically adjusted.
• Electricity consumption @ conditions 64°F (18°C)/80%RH.

Technical Details Comparison

The split unit includes two sections:

• Lower section that includes the compressor and the electrical switchboard.
• Upper section in which the air treatment is performed.

Both the upper and lower sections have a pair of copper tubes that should be connected between them, connecting the compressor to the air handling section of the unit. The split unit sections can be placed one next to each other, or one above the other (air treatment section above the compressor and electrical switchboard). In both cases, the upper unit must be at a height of at least 50–60 cm from the floor.

This unit is available with the SmartDG upgrade – Realtime Humidity Control & Data.

For information about the DG-6 heating & cooling split unit installation options please contact us with the form below

Small Unit One Phase

DG-5

DG-5

The DG-5 shares the efficiency of the slightly larger DG-6. It features the same unique, slim design, and air distribution module, but significantly shorter height and narrower width, allowing for even easier integration to various growing facilities.

  • Uses only 4.3 kw. 1 phase electricity connection.
  • Extracts up to 4.75 G/h (18 L/h), and covers up to 1,600 square meters (17,000 square feet).
  • Electricity requirements: 60 Hz - 1 phase (not available in EU and other 50 Hz countries).
Get a Quote
DG-5
DimensionsDepth
920 mm		Depth
3’ -0 1/4”
Width
2,050 mm		Width
6’ -8 3/4”
Height*1,910 mm
(2,410 mm with air
distribution module)		6’- 3 1/4”
(7’ - 11” with air
distribution module)
Water condensation
@18 °C ,80% RH		18 L/h4.75 G/h
Air flow~10,500 m/h3~ 6,500 CFM
Electricity consumption4.3 kw4.3 kw
Area coverageUp to 1,600 m2 Up to 17,000 ft2
Weight~520 kg~1,150 lb
Type of RefrigerantR410aR410a
Electricity requirements60 Hz1 phase, 230V, 60 Hz
I(Oper. max)= 35 Amp

* Exact height can be specifically adjusted.
• The unit can be positioned on the ground - along the aisles, as part of the rows, on the side of the greenhouse; or it can be hung.
• Electricity consumption @ conditions 18°C/80%RH.

Technical Details Comparison

Air Circulation:

Why does air circulation matter so much?

The DG-5 uses double-sided air input and has a patent protected design that creates uniform and constant climate conditions throughout the entire greenhouse. The powerful air circulation (6,500 CFM or 10,500 m3/h) is a clear advantage for commercial greenhouses with high plant density.

When the greenhouse is isolated, the unit collects the cold and humid air from between the plants, and “throws” it dry and warm in each direction to create unique 360° flow of dry air around the plants’ foliage.

Powerful Dehumidification:

Why do you need professional humidity control for greenhouse crops? 

The unit is designed to condense 18* L/h (4.75 G/h) of water, ~216 L/night (12 hours) (~57 G/night), the highest extraction rate on the market. It utilizes only 4.3 kW of electricity.

*At designed conditions of 18°C, 80% RH

Covered Area:

When calculating the area that can be covered by a single DG-5 unit it is important to take in consideration plant density, average daily temperature and radiation intensity. We use the “Leaf area index” (LAI) to characterize plant canopies and recommended number of units for the best results:

DryGair DG-5 covered area LAI
1,200 to 1,600 m2 1-2 (For example micro leaves)
Up to 800 m2 2-3 (For example Basil)
Up to 600 m2 3-4 (For example Tomatoes)
Up to 400 m2 4+ (For example Medical Cannabis)
  • Contact us for information about your LAI

Related products and add-ons

Minimize Energy Consumption & get Fast ROI with the “DryGair Solution”:

The DryGair Solution growing concept is based on closing the greenhouse, fully spreading the thermal screen (if applicable), and operating the DryGair unit. The unit heat-exchange technology treats the air, circulating it throughout the crops to create optimal uniform climate conditions for the plants. The unit utilizes the fans to suck the humid air from between the plants from the bottom of the greenhouse.

The DryGair Solution gives the grower the ability to control humidity levels and achieve homogeneous climatic conditions for long period of time while preventing 100% of heat loss from ventilation, and without the fluctuations typical to the traditional dehumidification solution of heating & ventilating.

DryGair dehumidification ROI

 

 

Compact Unit

DG-3

DG-3

DryGair's compact offering. It is ideal for professional growers looking for the same uniform climate conditions and powerful dehumidification achieved by the larger units, only for smaller growing facilities.

  • Same class leading efficiency of 1 kWh per gallon (~4 liters), as the larger units.
  • Wheels make the DG-3 mobile, and it can be easily moved from room to room or to different positions in the space.
  • Electricity requirements: 60 Hz - 1 phase (not available in EU and other 50 Hz countries).
Get a Quote
DG-3
DimensionsDepth
920 mm		Depth
3’ -0 1/4”
Width
1,370 mm		Width
4’ -6”
Height*1,910 mm
(2,410 mm with air
distribution module)		6’- 3 1/4”
(7’ - 11” with air
distribution module)
Water condensation
@18 °C ,80% RH		12 L/h3 G/h
Air flow~7,000 m/h3~ 4,500 CFM
Electricity consumption2.8 kw2.8 kw
Area coverageUp to 930 m2 Up to 10,000 ft2
Weight~385 kg~850 lb
Type of Refrigerant R410aR410a
Electricity requirements60 Hz1 phase, 230 V, 60 Hz
I(Oper. max)= 24 Amp

* Exact height can be specifically adjusted.
• The unit can be positioned on the ground - along the aisles, as part of the rows, on the side of the greenhouse; or it can be hung.
• Electricity consumption @ conditions 18°C/80%RH.

Technical Details Comparison

Air Circulation:

Why does air circulation matter so much?

The DG-3 uses double-sided air input and has a patent protected design that creates uniform and constant climate conditions throughout the entire greenhouse. The powerful air circulation (4,500 CFM or 7,000 m3/h) is a clear advantage for commercial greenhouses with high plant density.

When the greenhouse is isolated, the unit collects the cold and humid air from between the plants, and “throws” it dry and warm in each direction to create unique 360° flow of dry air around the plants’ foliage.

Powerful Dehumidification:

Why do you need professional humidity control for greenhouse crops? 

The unit is designed to condense 11.5* L/h (3 G/h) of water, ~138 L/night (12 hours) (~36.5 G/night), the highest extraction rate on the market. It utilizes only 2.8 kW of electricity.

*At designed conditions of 18°C, 80% RH

Covered Area:

When calculating the area that can be covered by a single DG-3 unit it is important to take in consideration plant density, average daily temperature and radiation intensity. We use the “Leaf area index” (LAI) to characterize plant canopies and recommended number of units for the best results:

DryGair DG-3 covered area LAI
750 to 930 m2 1-2 (For example micro leaves)
Up to 500 m2 2-3 (For example Basil)
Up to 375 m2 3-4 (For example Tomatoes)
Up to 250 m2 4+ (For example Medical Cannabis)
  • Contact us for information about your LAI

Related products and add-ons

Minimize Energy Consumption & get Fast ROI with the “DryGair Solution”:

The DryGair Solution growing concept is based on closing the greenhouse, fully spreading the thermal screen (if applicable), and operating the DryGair unit. The unit heat-exchange technology treats the air, circulating it throughout the crops to create optimal uniform climate conditions for the plants. The unit utilizes the fans to suck the humid air from between the plants from the bottom of the greenhouse.

The DryGair Solution gives the grower the ability to control humidity levels and achieve homogeneous climatic conditions for long period of time while preventing 100% of heat loss from ventilation, and without the fluctuations typical to the traditional dehumidification solution of heating & ventilating.

DryGair dehumidification ROI

 

 

Indoor grow rooms, small greenhouses and drying rooms

DG-X

DG-X

The DGX – a brand new dehumidifier dedicated to indoor cultivation, small greenhouses and drying rooms. The new DG-X is DryGair's entry model and features all of the advantages of the company's larger dehumidifiers such as 360° air circulation, best in class water extraction rate, and powerful fans (4,000 CFM / 6,800 sq\m) for uniform climate conditions.

  • Optimal water extraction rate and energy efficiency for both 80°F (26°C) / 60% RH & 64°F (18°C) / 80% RH.
  • Cube-like shape, combined with the ability to be hung or placed between plants makes it ideal for indoor facilities and small greenhouses where space is limited and shared with other components.
  • Features a digital display screen and controller.
Get a Quote
DG-X
DimensionsDepth
1,000 mm		Depth
43.3"
Width
1,080 mm		Width
42.5"
Height*1,000 mm
(~ 1,370 mm with air
distribution module)		39'
(+~1 feet with air
distribution module)
Water condensation
@27°C (80°F) ,60% RH		16 L/h4.23 G/h
Air flow~6,800 m/h3~ 4,000 CFM
Electricity consumption4.8 kw4.8 kw
Weight~320 kg~705 lb
Electricity requirements60 Hz1 phase, 230 V, 60 Hz
I(Oper. max)= 35 Amp

• Electricity consumption @ conditions 26°C (78.8°F), 60%RH.

Contact us directly for details and quote for your growing facility

Close


Contact us directly for details and quote for your growing facility

Contact Us About Products Videos Solution Terms & Privacy Technical Support Blog Downloads
Info@DryGair.com +972-9-7730980 USA & Canada: +1-604-385-4411
Contact Us