DG-6 50Hz Heating & Cooling

All-in-One - Powerful Humidity Control, Heating & Cooling and Patented Air Circulation

DG-6 Heating and Cooling
Drygair Water Extraction icon

Water Extraction

25 L/H

Drygair Air Circulation icon

Air Circulation

~13,000 M³/H

Patent Protected

Patent Protected

DG-6 50Hz is designed for smaller commercial greenhouses, and shares the high efficiency of the larger DG-12 50Hz. It features the same unique, slim design and air distribution module.

The DG-6 50Hz combined with heating & cooling, is an innovative solution for greenhouse heating or cooling, controlling both humidity and temperature in an energy efficient manner. The unit can gradually heat or cool the dried air flowing out of the dehumidifier. The dehumidification combined with heating & cooling offers a solution to uniformly control climate conditions, requiring much less infrastructure, compared to alternatives. Heating and cooling requires an external hot or cold water source. Specifications are calculated by the DryGair team on a case-by-case basis.

DryGair dehumidifiers are designed by a team of agronomists and climate engineers to address humidity, specifically in cultivation settings. Our team also assists every single grower in choosing the best solution for their unique facility and environment. DryGair is manufactured to uphold the highest standard, and comply with GMP regulations. DG-6 comes in 2 variations (50 Hz and 60 Hz), in order to accommodate growers worldwide.

The DG-6 50Hz series includes: DG-6 50Hz Standard, DG-6 50Hz Split, DG-6 50Hz Heating & Cooling, and DG-6 50Hz Heating & Cooling Split.

DG-6 Series Features

DG-6 Series Photos

  • DG-6 dehumidifier
  • dg-12 dehumidifier flower greenhouse

Technical Details

Depth 933 mm
Width 2,570 mm
Height 2,070 mm, 2,570 mm with air distribution module (exact height can be adjusted)
Weight ~890 kg
Operating Temperature 10°C – 40°C
Water Condensation 25 L/h @18°C ,80% RH
Air Flow ~13,000 m³/h
Electricity Consumption 6.5 kW
Electricity Requirements 3 phase, 400V, 50 Hz I(Oper. max)= 32 Amp
Hot Water Pipe Connection 1 ¼”
Type of Refrigerant R513A or R134A

Technical Sketches

Technical Videos

How to install 3 phase DryGair units
How to reset your DryGair unit

Available Add-Ons

Smart DG Controller

An advanced interface that allows growers to monitor and control their DryGair units both remotely and locally.

Castors (Wheels)

Add castors to DryGair units for easy transport in the growing facility. The wheels add ~9 cm (~3.5″) to the unit’s height.

Protective Wire Net

This robust metal cover protects the outer coils on both sides of the machine from physical damage. The cover is screwed around the coils on both sides of the unit.

Resistance To Chemicals And Sulphur

This coating treatment will protect the coils, inner copper components and welded parts from corrosion and will provide resistance to various harmful agents and particles. Contact us for the full list of chemicals.

Side Canopy

Unidirectional hoods For units positioned on the side of growing facilities. This side canopy will direct the unit’s airflow in one or two directions depending on the needs of the facility. Sizes: Height 850 mm (33.5″), Depth  910 mm (36″), Width 910 mm (36″)

Status Signal Light

External light to signal unit activity, stand-by mode, and errors.

Water Meter

DryGair Smart DG units can be installed with a high-end water meter to enable measurement of the amount of water extracted by the unit. It is attached to the drainage pipe at the bottom part of the unit and measures the amount of water by pulses of 100 ml. (3.4 oz.) The meter is directly connected to the main controller and has a battery that will last for 10 years. By Arad group.

DG-6 Series Downloads

Learn More

Go to Top