DG-6 60Hz Split

Easy Integration, Efficient Water Extraction, Large Coverage, Patented Air Circulation

Drygair Water Extraction icon

Water Extraction

6 G/H

Drygair Air Circulation icon

Air Circulation

~7000 CFM

Patent Protected

Patent Protected

DG-6 is designed for smaller commercial greenhouses, and shares the high efficiency of the larger DG-12. It features the same unique, slim design and air distribution module.

Space in any growing facility is precious, and growers should be able to maximize their use of it. Every meter counts. The DG-6 split upper and lower parts can be positioned according to the greenhouse’s specific limitations. Easy placement in the center or side of the greenhouse, along the aisles, on the ground or hung. The unit comes equipped with the SmartDG controller to monitor and control DryGair remotely.

DryGair dehumidifiers are designed by a team of agronomists and climate engineers to address humidity, specifically in cultivation settings. Our team also assists every single grower in choosing the best solution for their unique facility and environment. DryGair is manufactured to uphold the highest standard, and comply with GMP regulations. DG-6 comes in 2 variations (50 Hz and 60 Hz), in order to accommodate growers worldwide.

The DG-6 series includes: DG-6 60Hz Standard, DG-6 60Hz Split, DG-6 60Hz Heating & Cooling, DG-6 60Hz Heating & Cooling Split

DG-6 Series Features

DG-6 Series Photos

  • DG-6 dehumidifier
  • dg-12 dehumidifier flower greenhouse

Technical Details

Depth Upper Part 3’-8”
Width Upper Part 7′-7¼”
Height Upper Part
3′-8 ¾”, 5′-4¼” with air distribution module (exact height can be adjusted)
Weight Upper Part ~600 lbs
Depth Lower Part 2’-8¼”
Width Lower Part 6’-2¾”
Height Lower Part
3’-1”
Weight Lower Part ~600 lbs
Max. Distance Between Parts 13.5’
Operating Temperature 50°F – 80°F
Water Condensation 6 g/h @64°F ,80% RH
Air Flow ~7,000 CFM
Electricity Consumption 6 kW
Electricity Requirements 3 phase, 460V, 60 Hz/ I(Oper. max) = 16 Amp
3 phase, 208V, 60 Hz/ I(Oper. max) = 30 Amp
Type of Refrigerant R507

Technical Sketches

Technical Videos

How to install 3 phase DryGair units
How to reset your DryGair unit

Smart DG Controller

An advanced interface that allows growers to monitor and control their DryGair units both remotely and locally.

Available Add-Ons

Castors (Wheels)

Add castors to DryGair units for easy transport in the growing facility. The wheels add ~9 cm (~3.5″) to the unit’s height.

Heating & Cooling Kit

Heating and cooling kits can be added to DG-12 and DG-6 (Standard or Split models), to provide additional heating and cooling functions. The heating and cooling system requires an external hot or cold water source. Specifications are calculated by the DryGair team on a case-by-case basis.

Protective Wire Net

This robust metal cover protects the outer coils on both sides of the machine from physical damage. The cover is screwed around the coils on both sides of the unit.

Resistance To Chemicals And Sulphur

This coating treatment will protect the coils, inner copper components and welded parts from corrosion and will provide resistance to various harmful agents and particles. Contact us for the full list of chemicals.

Side Canopy

Unidirectional hoods For units positioned on the side of growing facilities. This side canopy will direct the unit’s airflow in one or two directions depending on the needs of the facility. Sizes: Height 850 mm (33.5″), Depth  910 mm (36″), Width 910 mm (36″)

Status Signal Light

External light to signal unit activity, stand-by mode, and errors.

Water Meter

DryGair Smart DG units can be installed with a high-end water meter to enable measurement of the amount of water extracted by the unit. It is attached to the drainage pipe at the bottom part of the unit and measures the amount of water by pulses of 100 ml. (3.4 oz.) The meter is directly connected to the main controller and has a battery that will last for 10 years. By Arad group.

DG-6 Series Downloads

Learn More

Go to Top