Water Extraction
6 G/H
Air Circulation
~7,000 CFM
Patent Protected
The DG-6 shares the high efficiency of the larger DG-12. It features the same unique, slim design, and air distribution module, and is designed to treat smaller commercial greenhouses and grow rooms. Easy placement in the center or side of the greenhouse, along the aisles, on the ground or hung. The unit comes equipped with the SmartDG controller to monitor and control DryGair remotely.
DryGair dehumidifiers are designed by a team of agronomists and climate engineers to address humidity, specifically in cultivation settings. Our team also assists every single grower in choosing the best solution for their unique facility and environment. DryGair is manufactured to uphold the highest standard, and comply with GMP regulations. DG-6 comes in 2 variations (50 Hz and 60 Hz), in order to accommodate growers worldwide.
The DG-6 series includes: DG-6 60Hz Standard, DG-6 60Hz Split, DG-6 60Hz Heating & Cooling, DG-6 60Hz Heating & Cooling Split
DG-6 Series Features
Designed for optimal cultivation conditions.
Measured in liters of water extracted per kW.
Integrates with existing/additional climate control systems.
360° air dispersal for climate uniformity.
Flexible placement options in the growing facility and easy plug & play installation.
DG-6 Series Photos
Technical Details
| Depth | 3’-¾” |
| Width | 7’-7¼” |
| Height | 6’-9¾”, 7’-11¾” with air distribution module (exact height can be adjusted) |
| Weight | ~1,200 lb |
| Operating Temperature | 50°F – 80°F |
| Water Condensation | 6 g/h @64°F, 80% RH |
| Air Flow | ~7,000 CFM |
| Electricity Consumption | 6 kW |
| Electricity Requirements | 3 phase, 460V, 60 Hz/ I(Oper. max) = 16 Amp 3 phase, 208V, 60 Hz/ I(Oper. max) = 30 Amp |
| Type of Refrigerant | R507 |
Technical Sketches
Technical Videos
How to install 3 phase DryGair units
How to reset your DryGair unit
Available Add-Ons
Castors (Wheels)
Add castors to DryGair units for easy transport in the growing facility. The wheels add ~9 cm (~3.5″) to the unit’s height.
Heating & Cooling Kit
Heating and cooling kits can be added to DG-12 and DG-6 (Standard or Split models), to provide additional heating and cooling functions. The heating and cooling system requires an external hot or cold water source. Specifications are calculated by the DryGair team on a case-by-case basis.
Protective Wire Net
This robust metal cover protects the outer coils on both sides of the machine from physical damage. The cover is screwed around the coils on both sides of the unit.
Resistance To Chemicals And Sulphur
This coating treatment will protect the coils, inner copper components and welded parts from corrosion and will provide resistance to various harmful agents and particles. Contact us for the full list of chemicals.
Side Canopy
Unidirectional hoods For units positioned on the side of growing facilities. This side canopy will direct the unit’s airflow in one or two directions depending on the needs of the facility. Sizes: Height 850 mm (33.5″), Depth 910 mm (36″), Width 910 mm (36″)
Status Signal Light
External light to signal unit activity, stand-by mode, and errors.
Water Meter
DryGair Smart DG units can be installed with a high-end water meter to enable measurement of the amount of water extracted by the unit. It is attached to the drainage pipe at the bottom part of the unit and measures the amount of water by pulses of 100 ml. (3.4 oz.) The meter is directly connected to the main controller and has a battery that will last for 10 years. By Arad group.
DG-6 Series Downloads
Learn More
The Ducting Dilemma: Why Air Ducts Often Create Greenhouse Climate Problems
The Ducting Dilemma: Why Air Ducts Often Create Greenhouse ClimateRead More ›
The Role of Vertical Air Circulation in Controlled Environment Agriculture
The Role of Vertical Air Circulation in Controlled EnvironmentRead More ›
Navigating Funding Opportunities for Sustainable Greenhouse Cultivation in Canada
Navigating Funding Opportunities for Sustainable Greenhouse Cultivation in CanadaRead More ›
