DG-6 is designed for smaller commercial greenhouses, and shares the high efficiency of the larger DG-12. It features the same unique, slim design and air distribution module.
The DG-6 combined with heating & cooling, is an innovative solution for greenhouse heating or cooling, controlling both humidity and temperature in an energy efficient manner. The unit can gradually heat or cool the dried air flowing out of the dehumidifier. The dehumidification combined with heating & cooling offers a solution to uniformly control climate conditions, requiring much less infrastructure, compared to alternatives. Heating and cooling requires an external hot or cold water source. Specifications are calculated by the DryGair team on a case-by-case basis.
DryGair dehumidifiers are designed by a team of agronomists and climate engineers to address humidity, specifically in cultivation settings. Our team also assists every single grower in choosing the best solution for their unique facility and environment. DryGair is manufactured to uphold the highest standard, and comply with GMP regulations. DG-6 comes in 2 variations (50 Hz and 60 Hz), in order to accommodate growers worldwide.
The DG-6 series includes: DG-6 Standard, DG-6 Split, DG-6 Heating & Cooling, and DG-6 Heating & Cooling Split.
DG-6 Series Features
DG-6 Series Photos
|Height||2,070 mm, 2,570 mm with air distribution module (exact height can be adjusted)|
|Optimal °C Range||10°C – 26°C|
|Water Condensation||24 L/h @18°C ,80% RH|
|Air Flow||~12,000 m³/h|
|Electricity Consumption||6 kW|
|Electricity Requirements||3 phase, 400V, 50Hz|
I(Oper. max) = 18 Amp
|Hot Water Pipe Connection||1 ¼”|
|Type of Refrigerant||R507|
How to install 3 phase DryGair units
How to reset your DryGair unit
An interface that lets growers monitor and control their DryGair units remotely and locally. The Smart DG system includes an interactive platform that collects data and provides full control over DryGair units. The system includes a smart sensor and physical offline interface, integrated into the dehumidifier. It also provides a remote interface which is accessible through any web browser, on any device (PC, smartphone, etc.).
The air filters cover the coils on both sides of the unit and protect it from dust and small debris particles. They come with a magnetic frame for easy attachment and detachment for cleaning, and do not impede airflow into the machine.
Add castors to DryGair units for easy transport in the growing facility. The wheels add ~9 cm (~3.5″) to the unit’s height.
Protective Wire Net
This robust metal cover protects the outer coils on both sides of the machine from physical damage. The cover is screwed around the coils on both sides of the unit.
Resistance To Chemicals And Sulphur
This coating treatment will protect the coils, inner copper components and welded parts from corrosion and will provide resistance to various harmful agents and particles. Contact us for the full list of chemicals.
Unidirectional hoods For units positioned on the side of growing facilities. This side canopy will direct the unit’s airflow in one or two directions depending on the needs of the facility. Sizes: Height 850 mm (33.5″), Depth 910 mm (36″), Width 910 mm (36″)
Noise reducing add-on suppresses noise from compressor operation.
Status Signal Light
External light to signal unit activity, stand-by mode, and errors.
DryGair Smart DG units can be installed with a high-end water meter to enable measurement of the amount of water extracted by the unit. It is attached to the drainage pipe at the bottom part of the unit and measures the amount of water by pulses of 100 ml. (3.4 oz.) The meter is directly connected to the main controller and has a battery that will last for 10 years. By Arad group.